Published
ISO 898-5:2012 specifies mechanical and physical properties of set screws and similar threaded fasteners made of carbon steel or alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when set screws and similar threaded fasteners are considered all together) which conform to the requirements of ISO 898-5:2012 are evaluated at that ambient temperature range.
Fasteners according to ISO 898-5:2012 are classified to specified hardness classes and are intended for use under compressive stress only.
ISO 898-5:2012 is applicable to set screws and similar fasteners:
made of carbon steel or alloy steel,
having a triangular ISO metric screw thread according to ISO 68-1,
with a coarse pitch thread M1,6 to M30, and fine pitch thread M8×1 to M30×2,
with diameter/pitch combinations according to ISO 261 and ISO 262, and
having thread tolerances according to ISO 965-1 and ISO 965-2.
Revises
ISO 898-5:1998
PUBLISHED
ISO 898-5:2012
90.93
Standard confirmed
Jun 24, 2022
Only informative sections of projects are publicly available. To view the full content, you will need to members of the committee. If you are a member, please log in to your account by clicking on the "Log in" button.
Shqip